Hi guys, this is what i'm going to do this weekend.
Topic "How To Fix A Bad Ceramic Tile Floor"
Ceramic tile in a kitchen can really stand out and give an expensive and updated feel. This type of flooring is very durable and can last for many years, and is even rated to last as long as the structure. But, if the ceramic tile is not properly installed, it can actually take away from the beauty and elegance of the flooring. Easy problems to fix can include too much grout between the tiles, and then the grout not being sealed. These problems are do-it-yourself fixes, which can be done during a weekend.
Grout is the material between the tiles, which fills in the spaces after the tiles are installed. There are different colors of grout you can use, along with different types. Most people tend to use a white or off white grout, for their ceramic tile floors. Sometimes, you may end up with too much grout in between the tiles. This may be the case if you buy a house with ceramic floors, or if you have installed the ceramic tile yourself. If this happens, and the grout is now dry, there is a very easy way to remove this extra grout.
The hardware stores sell a tool known as a dremel tool. This is basically a cordless screwdriver, and comes with a bunch of different attachments. They also make special attachments directly for ceramic tile removal. You can actually repair the grout 2 ways: You can remove all of the grout and redo the grout, or just grind it down a bit so all of the grout is the same level or depth. This article looks at just grinding down the grout to the same level.
Now you have the grout looking the same. Most likely, it will still be dirty. Grout is very porous, which means it has many holes in it which allow for dirt to get into. You need to seal this, but before you seal it, you need to clean it. There are many grout cleaners out there, and all of these will work. But good old bleach will also do the trick. Mix a bucket of 50/50 with bleach and water, and scrub out the grout. This bleach mixture will help to clean and brighten the grout, and will also kill any mold or mildew which may be growing in the grout. Once you are done, mop the floor and see how the grout looks. Repeat this process until the grout is the color you are looking for. Now you need to seal it.
Before you seal it, ensure the grout is completely dry. You can buy the grout sealer at any of the hardware stores. Ensure to read the directions on this, but most of the sealers are all the same. Just apply the sealer to the grout, not the tile. This will take some time, as you will need a small paint brush and a steady hand. If you get any on the tiles, just wipe it off immediately. This sealer will seal all of the holes in the grout, and help to keep out any of the water or dirt. This will keep the grout the same color as the original color. Also, when you mop the floor, the mop water will not get into the grout. Sealers are very important. If you choose not to use it, your grout will get dirty again, and you will be scrubbing it again.
With a dremel, a ceramic tile grout remover, some bleach, and a sealer, you can get your ceramic tile looking like new again. Money has already been heavily invested into the flooring, so with a little sweat equity and some time, you can get your ceramic tile floor fixed and back to its original appearance.